Cheap nt30 er32, Buy Quality iso standard directly from China spring collet Suppliers: ISO standard NT30 ER32 70mm Spring Collet Chuck CNC Milling Toolholder
1. ER type chuck can clamp drills,ed mills,reamers & taps.
2. Taper:ISO/NT30 Collet:ER32 Length:7mm
3. ISO standard size with good quality.
4. If qty is more than 5,please contact me to choose the best transportation way for you..
5. Delivery via DHL,Fedex,EMS, is also available..
6. Each prodcut packed in a suitable plastic box,then wrapped by polystyrene foam.
Product parameter and drawing:
In order to obtain better cutting surface and prolong tool life. Please be sure to use high precision, high rigidity, good dynamic balance tool holder
1 Before using this holder, please measure the tool\'s defletion ,The defletion should 0.01
2. Should make the overhang chuck as short as possible ,if the tool extension too long ,pls cut speed ,feed speed and cutting volume.
3 . When abnormal vibration or sound is produced during cutting,pls cut the spindle speed and cutting amount to the situation has improved.
4.Steel cooling to spray or jet is the best suitable way to make high-aluminum titanium play to the best result.
.Stianess steel , titanium alloy or heat resistant alloy is recommended to use no water sluble cutting fluid.
5.According to the influence of workpiece ,machine and software ,the above data are only for reference ,After the cutting condition is stable ,the feed rate will be increased by 10%-30%.
Tags: nt30 er32, iso standard, spring collet, Cheap nt30 er32, High Quality iso standard, China spring collet Suppliers.
|Package Weight||1.0kg (2.20lb.)|
|Package Size||20cm x 15cm x 25cm (7.87in x 5.91in x 9.84in)|